_________________________________________________________________________________
_________________________________________________________________________________
_________________________________________________________________________________
Boaters can enjoy a durable and reliable electric trim tab system designed for 17-28 foot boats. Bennett Marine invented the electric trim tab in 1960, and now Bennett leads the way with an electric trim tab system designed
to outperform and outlast any electric system on the market.

Compared to other electric systems using old technologies designed over twenty years ago, the BOLT Electric combines cutting-edge technology with a robust and water-tight actuator. This new "Superior by Design"
technology resolves the issues that older systems have with breaking apart and water intrusion caused by design flaws and marine growth.

While we strongly recommend hydraulic trim tabs for most applications, electric trim tab systems are suitable for:
  • Trailered boats from 17-28 feet
  • Single actuator use, due to the inability to synchronize two electric actuators on the same tab

Features:
  • Wires are concealed and protected through the upper hinge - there are no
exposed wires to the marine environment
  • Robust, water-tight black nylon actuator provides trouble-free operation
  • Main seal located high to protect against marine growth and water intrusion failures
  • Quieter than any other system on the market - No more scaring the fish away!
  • Installation is fast - no need to disassemble parts of the actuator.

Controls are not included and are sold separately
Backed by nearly 40 years of trim tab experience, Bennett Sport Tabs are engineered for the demands of offshore attitude correction. Performance boats that are
run at speeds of 60 mph require the rugged construction and enjoy the sophisticated black powder coated finish of Sport Tabs. Manufactured with heavy gauge
reinforced stainless steel and powerful hydraulic actuators, Sport Tabs combine strength, durability, and good looks to achieve your boat's maximum potential.

Features & Benefits:
  • Get on plane fast, and stay on plane at intermediate speeds
  • Correct listing and uneven loads
  • Reduce pounding and eliminate porpoising
  • Increase speed
  • improve visibility and safety
  • Improve fuel efficiency
  • Precise and accurate control
  • Low maintenance with long-term value
  • Easy to service

Items Included in Sets:
  • (2) Trim Plane Assemblies
  • Hydraulic Actuators ◦(2) ST9
  • (4) ST12 & ST16
  • (1) Hydraulic Power Unit
  • (1) Euro-Style Rocker Switch Control
  • (1) Hardware Bag
  • (1) 20′ Hydraulic Tubing
_________________________________________________________________________________
_________________________________________________________________________________
_________________________________________________________________________________
847-373-1841
Home         Brig Boats         Accessories         Electronics         Contact Us
______________________________________________________________________________________________________________________
______________________________________________________________________________________________________________________   
______________________________________________________________________________________________________________
NOTE:  There is a 10% re-stocking charge for cancelled or returned merchandise
IMPORTANT NOTE FOR ORDERS FROM OUTSIDE OF THE U.S.:   Shipping charges for orders outside of the Continental U.S. will be billed separately.  International shipping
is based on weight, size and destination country and are shipped via USPS Priority International Mail, unless requested otherwise or is prohibited by size or weight.
Cat. No.
Model
Bennett
No.
LIST
BE16850
Bennett Trim Tab Kit 12" x 9" w/Euro
Rocker Switch
129E
$727.00
BE16851
Bennett Trim Tab Kit 18" x 9" w/Euro
Rocker Switch
189E
$782.00
BE16852
Bennett Trim Tab Kit 24" x 9" w/Euro
Rocker Switch
249E
$810.00
BE16853
Bennett Trim Tab Kit 30" x 9" w/Euro
Rocker Switch
309E
$845.00
BE16854
Bennett Trim Tab Kit 36" x 9" w/Euro
Rocker Switch
369E
$871.00
BE16855
Bennett Trim Tab Kit 42" x 9" w/Euro
Rocker Switch
429E
$915.00
BE16869
Bennett Trim Tab Kit 12" x 9" w/o Control  
129
$635.00
BE16870
Bennett Trim Tab Kit 18" x 9" w/o Control
189
$690.00
BE16871
Bennett Trim Tab Kit 24" x 9" w/o Control
249
$718.00
BE16872
Bennett Trim Tab Kit 30" x 9" w/o Control
309
$753.00
BE16873
Bennett Trim Tab Kit 36" x 9" w/o Control
369
$779.00
BE16875
Bennett Trim Tab Kit 42" x 9" w/o Control
429
$823.00
Cat. No.
Model
Bennett
No.
LIST
BE16857
Bennett Trim Tab Kit 12" x 12" w/Euro
Rocker Switch
1212E
$783.00
BE16858
Bennett Trim Tab Kit 18" x 12" w/Euro
Rocker Switch
1812E
$810.00
BE16859
Bennett Trim Tab Kit 24" x 12" w/Euro
Rocker Switch
2412E
$837.00
BE16860
Bennett Trim Tab Kit 30" x 12" w/Euro
Rocker Switch
3012E
$871.00
BE16861
Bennett Trim Tab Kit 36" x 12" w/Euro
Rocker Switch
3612E
$915.00
BE16862
Bennett Trim Tab Kit 42" x 12" w/Euro
Rocker Switch
4212E
$973.00
BE16863
Bennett Trim Tab Kit 48" x 12" w/Euro
Rocker Switch  
4812E
$1,162.00
BE16877
Bennett Trim Tab Kit 12" x 12" w/o Control
1212
$691.00
BE16878
Bennett Trim Tab Kit 18" x 12" w/o Control
1812
$718.00
BE16879
Bennett Trim Tab Kit 24" x 12" w/o Control
2412
$745.00
BE16880
Bennett Trim Tab Kit 30" x 12" w/o Control
3012
$779.00
BE16881
Bennett Trim Tab Kit 36" x 12" w/o Control
3612
$823.00
BE16882
Bennett Trim Tab Kit 42" x 12" w/o Control
4212
$881.00
BE16883
Bennett Trim Tab Kit 48" x 12" w/o Control
4812
$1,070.00
Bennett Trim Tabs are designed and manufactured with pride at the Bennett Marine plant in Deerfield Beach, Florida. Every Bennett system carries
with it an accumulation of nearly 40 years of research, development, and testing and is designed to provide years of dependable service.

Every trim tab is sheared and bent, not welded. Welding alters the properties of stainless steel which invites corrosion. Bennett actuators feature
through-hull hydraulics. There are no vulnerable external hoses to decay. Plus, every Hydraulic Power Unit is tested by both person and computer to
insure this reliable unit deflects the trim tabs, holds firmly during use, and retracts smoothly.

Standard Trim Tab Kit
Bennett Standard Trim Tab Kits are ideal for cruisers who want to optimize performance over a broad range of sea conditions. Kits are complete with
all the necessary components for installation. These are supplied with or without the Euro-Style Rocker Switch.

Features & Benefits:
  • Get on plane fast, and stay on plane at intermediate speeds
  • Correct listing and uneven loads
  • Reduce pounding and eliminate porpoising
  • Increase speed
  • Improve visibility and safety
  • Improve fuel efficiency
  • Precise and accurate control
  • Low maintenance with long-term value
  • Easy to service
Bennett Classic Style Hydraulic Trim Tab Kits
SEE OUR
PRICE
SEE OUR
PRICE
9" Deep Tabs
12" Deep Tabs
Classic Tab Kits with EIC Control
Classic Tab Kits with Tab Position Indicator
Cat. No.
Model
Bennett
No.
PRICE
BE41788
Bennett Trim Tab Kit 12" x 9" w/EIC Switch
129EIC
$629.99
BE41791
Bennett Trim Tab Kit 18" x 9" w/EIC Switch
189EIC
$667.99
BE41792
Bennett Trim Tab Kit 24" x 9" w/EIC Switch
249EIC
$669.99
BE41794
Bennett Trim Tab Kit 30" x 9" w/EIC Switch
309EIC
$708.99
BE41787
Bennett Trim Tab Kit 12" x 12" w/EIC
Switch
1212EIC
$668.99
BE41789
Bennett Trim Tab Kit 18" x 12" w/EIC
Switch
2412EIC
$678.99
BE41790
Bennett Trim Tab Kit 24" x 12" w/EIC
Switch
2412EIC
$702.99
BE41793
Bennett Trim Tab Kit 30" x 12" w/EIC
Switchl
3012EIC
$729.99
Cat. No.
Model
Bennett
No.
PRICE
BE42713
Bennett Trim Tab Kit 12" x 9" w/Tab
Position Indicator
129ETPI
$625.99
BE42714
Bennett Trim Tab Kit 18" x 9" w/Tab
Position Indicator
189ETPI
$663.99
BE42715
Bennett Trim Tab Kit 24" x 9" w/Tab
Position Indicator
249ETPI
$655.99
BE42717
Bennett Trim Tab Kit 30" x 9" w/Tab
Position Indicator
309ETPI
$709.99
BE42718
Bennett Trim Tab Kit 12" x 12" w/Tab
Position Indicator
1212ETPI
$663.99
BE42719
Bennett Trim Tab Kit 18" x 12" w/Tab
Position Indicator
1812ETPI
$655.99
BE42720
Bennett Trim Tab Kit 24" x 12" w/Tab
Position Indicator  
2412ETPI
$705.99
BE42721
Bennett Trim Tab Kit 30" x 12" w/Tab
Position Indicator
3012ETPI
$725.99
ORDER
NOW
ORDER
NOW
Bennett's M80 and M120 Sport Tabs are ideal for trailered boats in the 17-foot to 23-foot range. Their unique Batwing design provides
30 percent more lift than conventional trim tabs and their space-saving design ensures easy installation on virtually any transom.
  • M80: 8" x 10"  for 17 foot to 20 foot boat
  • M120: 10" x 12"  for 20 foot to 23 foot boat

Features & Benefits:
  • Unique batwing design provides 30% more lift than conventional trim tabs.
Space-saving design will fit virtually any transom.
  • Get on plane fast, and stay on plane at intermediate speeds
  • Correct listing and uneven loads
  • Reduce pounding and eliminate porpoising
  • Increase speed
  • improve visibility and safety
  • Improve fuel efficiency
  • Precise and accurate control
  • Low maintenance with long-term value
  • Easy to service
Bennett M80/M120 Sport Tab System
Cat. No.
Model
Bennett
No.
LIST
BE16890
Bennett M80 Sport Tab System
M80
$699.00
BE16891
Bennett M120 Sport Tab System
M120
$749.00
BE30672
Bennett M80 Sport Tab Sys w/Electronic
Indicator Control
M80EIC
$994.00
BE30673
Bennett M120 Sport Tab Sys w/Electronic
Indicator Control
M120EIC
$1,044.00
BE30674
Bennett M80 Sport Tab Sys w/Tab
Position Indicator Control
M80TPI
$904.00
BE30675
Bennett M120 Sport Tab Sys w/Tab
Position Indicator Control
M120TPI
$954.00
SEE OUR
PRICE
Bennett Performance Sport Tab System
Cat. No.
Model
Bennett
No.
LIST
BE16892
Bennett Trim Tab 12" x 9" Performance
Sport Tab System
ST9
$849.00
BE16893
Bennett Trim Tab 12" x 12" Performance
Sport Tab System
ST12
$1,074.00
BE16894
Bennett Trim Tab 12" x 16" Performance
Sport Tab System
ST16
$1,162.00
SEE OUR
PRICE
Bennett BOLT Electric Trim Tab System
Cat. No.
Model
Bennett
No.
PRICE
BE54103
Bennett BOLT 12x4 Electric Trim Tab
System - No Control Switch
BOLT124
$345.99
BE54104
Bennett BOLT 12x9 Electric Trim Tab
System - No Control Switch
BOLT129
$359.99
BE54105
Bennett BOLT 18x9 Electric Trim Tab
System - No Control Switch
BOLT189
$384.99
BE54106
Bennett BOLT 24x9 Electric Trim Tab
System - No Control Switch
BOLT249
$409.99
BE54107
Bennett BOLT 12x12 Electric Trim Tab
System - No Control Switch
BOLT1212
$384.99
BE54108
Bennett BOLT 18x12 Electric Trim Tab
System - No Control Switch
BOLT1812
$409.99
BE54109
Bennett BOLT 24x12 Electric Trim Tab
System - No Control Switch
BOLT2412
$436.99
ORDER
NOW
Items Included in Sets:
  • (2) Trim Plane Assemblies
  • (2) Hydraulic Actuators
  • (1) Hydraulic Power Unit
  • (1) Control unit (or combo) including wiring
  • (1) Hardware Bag
  • (1) 20′ Hydraulic Tubing
Items Included in Sets:
  • (2) Trim Plane Assemblies
  • (2) Hydraulic Actuators
  • (1) Hydraulic Power Unit
  • (1) Control unit (or combo) including wiring
  • (1) Hardware Bag
  • (1) 20′ Hydraulic Tubing
Items Included in Sets:
  • (2)  12-volt actuators with 6ft. wire harnasses and
    waterproof connectors
  • (2) Stainless steel trim planes (tabs) and mounting
    plates
  • (2) 20ft. or custom length harnesses with waterproof
    connectors
Bennett BOLT Parts & Accessories
Rocker Switch Control for BOLT
This control is ergonomically designed, water resistant and provides a
positive "click" when the trim tabs are engaged. Its lock-out feature
prevents user from pressing down on opposite directions at the same
time. The control is easy to install, fitting into any existing Bennett 2
+-inch Rocker Switch hole. Bridge control comes with a 20' wire harness.
Cat. No. BE54110     Mfg. No. BRC4000      Cost  $74.99
Control Pad for BOLT w/Retractor, no Indicator.
Cat. No. BE54111     Mfg. No.  BCN6000      Cost  $144.99
Control Pad for BOLT with Retractor and Indicator.
Specifications:  12 VDC, 20 A
Cat. No. BE54112     Mfg. No.  BCI8000        Cost  $289.99
Electric Actuator f/BOLT
This robust, water-tight black nylon actuator provides
trouble-free operation for years to come.
Specifications:  12 VDC, 20 A
Cat. No. BE54114     Mfg. No.  BEA2000       Cost  $184.99
BOLT Actuator UH Spacer
Bennett Trim Tabs BOLT Actuator UH Spacer
Cat. No. BE54115     Mfg. No.  BEA2100       Cost  $11.29
BOLT Replacement Keypad - No Indicator
Replacement keypad without indicator
Cat. No. BE54117     Mfg. No.  BCN6700       Cost  $82.99
BOLT Control Box for BCI
Control box for BCI
Cat. No. BE54118     Mfg. No.  BCI8500        Cost  $219.99
BOLT Replacement Keypad w/Indicator
Replacement BOLT Keypad w/indicator
Cat. No. BE54119     Mfg. No.  BCI8700        Cost  $105.99
Cat. No.
Model
Bennett
No.
PRICE
BE54120
BOLT Actuator Wire
Harness Extension - 5'
BAW2005
$28.99
BE54121
BOLT Actuator Wire
Harness Extension - 10'
BAW2010
$31.99
BE54122
BOLT Actuator Wire
Harness Extension - 15'
BAW2015
$34.99
BE54123
BOLT Actuator Wire
Harness Extension - 20'
BAW2020
$37.99
Cat. No.
Model
Bennett
No.
PRICE
BE54124
BOLT Keypad Wire
Extension - 3'
BHW4003
$37.99
BE54125
BOLT Keypad Wire
Extension - 5'
BHW4005
$39.99
BE54126
BOLT Keypad Wire
Extension - 7''
BHW4007
$40.99
BE54127
BOLT Keypad Wire
Extension - 10'
BHW4010
$43.99
Bennett AC3000 Auto Tab Control System
Get a Perfectly Trimmed Boat - Every Time!
Bennett Marine pioneered the Auto Tab Control (ATC) to make the boater's experience on the water even better. It does exactly what it says it
does - interacting directly with your trim tab system to automatically monitor your boat's position and maintain the perfect cruising attitude.

Major Benefits:
  • Saves you money on fuel. A properly trimmed boat can significantly lower fuel costs in a single season of usage.
  • Easy to install - just plug and play! Very few tools are needed for installation, and everything plugs right into the ATC Control Unit.
  • No more guesswork - it trims the boat better than you can. Calculating more than a thousand attitude readings per second, the ATC
    adjusts your trim tabs to changes in vessel speed, sea conditions and shifting weight.
  • The most comfortable ride you've ever had on your boat. Maintain the best cruising attitude without the need to work manual trim controls.
  • For dual-helm applications, use the AC3000A Dual Station Auto Tab Control System.
AC3000A Dual Station
System
AC3000 Auto Tab Control          Cat. No. BE29573     Mfg. No.  AC3000        Cost  $289.99
AC3000A Dual Station ATC       Cat. No. BE34157     Mfg. No.  AC3000A      Cost  $410.99
Bennett Trim Tab Conversion Kits
Lenco to BOLT Conversion Kit - Electric
to Electric

This conversion kit includes 2 BOLT Electric
Actuators plus all hardware needed to
convert your system.
Cat. No. BE54113    Mfg. No. BOLTLKCON   Cost  $259.99
  Boat Leveler to Bennett Actuator Conversion Kit - Hydraulic to
                                                Hydraulic
Bennett Marine's V351CK conversion kit replaces Boat Leveler cylinders with
Bennett though-hull fittings.
Kit includes:
  • 2 hydraulic cylinders and all hardware to convert your system
  • 2 stainless steel conversion brackets
  • 8 1/4-20 x 1/2 machine screws
  • 4 1/4-20 x 3/4 wood screws
  • 2 3" pipe nipples
  • 2 female barb fittings
  • 2 actuators
Cat. No. BE54128    Mfg. No. V351CK     Cost  $192.99
Lenco to Bennett Conversion Kit - Electric to Hydraulic

Economical, easy installation alternative to replacing Lenco actuator or
purchasing an entire trim tab system. Uses existing Lenco trim planes. No need
to patch or re-drill mounting holes.
Kit includes:
  • Custom adapter plates for actuator and trim plane assembly
  • Bennett Hydraulic Power Unit
  • Two standard actuators
  • Water resistant Rocker Switch Control, hardware and all wiring
Cat. No. BE54129    Mfg. No. V351LK     Cost  $313.99
Bennett Parts & Accessories
Electronic Indicator Control Kit (EIC) - 12V
Three features combined into one sophisticated control - the popular
Bennett rocker switch control, trim tab indicator and the Auto Tab Retractor.
Water resistant, highly accurate and features variable intensity LEDs for
night or day. Features a relay module mounted near the transom, which
simplifies installation by reducing the number of wires to run to the helm.
Features:
  • EIC Display (EIC001)
  • 12V EIC Relay Module (EIC101)
  • Sensor with 10' SC Red and Connector (EIC901P)
  • Sensor with 10' SC Green and Connector (EIC901S)
  • 20' EIC Cable (EIC201)
  • EIC Pigtail Pack (EIC401)
  • EIC Hardware Pack (EIC501)
Cat. No. BE30596     Mfg. No. EIC5000      Cost  $289.99
Electronic Indicator Control Kit (EIC) w/Bridge Control & 2 Displays
Three features combined into one sophisticated control - the popular
Bennett rocker switch control, trim tab indicator and the Auto Tab Retractor.
Water resistant, highly accurate and features variable intensity LEDs for
night or day. Features a relay module mounted near the transom, which
simplifies installation by reducing the number of wires to run to the helm.
Includes:
  • Everything included with the EIC5000 kit, plus additional display and
    cable
Cat. No. BE52201    Mfg. No. EIC5000A      Cost  $424.99
Bennett TPI2000 Tab Position Indicator
Attractive, compact, water resistant and easy to install. The TPI helm
display accurately shows deflection percentage of each trim tab, and
the LED brightness is adjustable for any lighting condition. Works
with all Bennett Trim Tabs.
Cat. No. BE16904     Mfg. No.  TPI2000       Cost  $182.99
Cat. No. BE16905     Mfg. No.  TPI2000B      Cost  $369.99
Bennett TPI2000B Dual Station Tab Position Indicator Kit
Attractive, compact, water resistant and easy to install. The TPI helm display
accurately shows deflection percentage of each trim tab, and the LED
brightness is adjustable for any lighting condition. Works with all Bennett
Trim Tabs.  Additional TPI Display and cable included.
Bennett ES2000A Euro Style Rocker Switch w/20' Wire Harness
This control is ergonomically designed, water resistant and provides a
positive "click" when the trim tabs are engaged. Its lockout feature prevents
user from pressing down on opposite directions at the same time. The
control is easy to install, fitting into any existing Bennett 2-1/2-inch Rocker
Switch hole.   Bridge control comes with a 20' wire harness
Cat. No. BE16898     Mfg. No.  ES2000A       Cost  $83.99
Euro-Style Rocker Switch Control
This control is ergonomically designed, water resistant and provides
a positive "click" when the trim tabs are engaged. Its lockout feature
prevents user from pressing down on opposite directions at the same
time. The control is easy to install, fitting into any existing Bennett 2-
1/2-inch Rocker Switch hole.
Cat. No. BE16897     Mfg. No.  ES2000       Cost  $63.99
Bennett Hydraulic Power Unit - 12V or 24V Pump
A compact powerhouse that creates hydraulic pressure to lower and
raise the trim tabs. It employs two solenoid valves to direct the flow of
fluid to the actuators. The solenoid valves lock tightly to secure the
tabs in place. Strength to lower and hold even the largest tabs in
place. Lexan cover protects electrohydraulic unit from occasional
wash down and translucent reservoir allows fluid check at a glance.
Measures 4" x 7 1/2" x 5 1/2". Uses automatic transmission fluid.
Includes pump, solenoid valves, reservoir and cover.
Cat. No. BE16928   12V    Mfg. No.  V351HPU1     Cost  $269.99
Cat. No. BE16929   24V    Mfg. No.  V351HPU2      Cost  $279.99
Bennett NMEA 2000 Trim Tab Indicator Kit
See the position of your trim tabs on your NMEA 2000 compatible Multi-
Function Display or Gauge, GPS/Chart Plotter, or Sonar! The interface kit
will fit all Bennett Trim Tab systems and is compatible with LowranceNET
and other NMEA 2000 compliant electronics.
Save Time and Money!
  • No need to buy a separate display for your trim tabs.
  • Compatible with NMEA 2000 networks.
  • See your trim tab position on your GPS, Chart Plotter, or Sonar
  • Kit comes with Bennett Trim Tab Sensors, Interface Module, and
    LowranceNET connectors.
Cat. No. BE30298     Mfg. No.  NMEA1     Cost  $122.99
Cat. No.
Model
Bennett
No.
PRICE
BE43650
Bennett 12 x 9 Standard
Trim Plane Assembly
TPA129
$98.99
BE43651
Bennett 18 x 9 Standard
Trim Plane Assembly
TPA189
$124.99
BE43652
Bennett 24 x 9 Standard
Trim Plane Assembly
TPA249
$138.99
BE43653
Bennett 12 x 12 Standard
Trim Plane Assembly
TPA1212
$125.99
BE43654
Bennett 18 x 12 Standard
Trim Plane Assembly
TPA1812
$128.99
BE43655
Bennett 24 x 12 Standard
Trim Plane Assembly
TPA2412
$138.99
Cat. No.
Model
Bennett
No.
PRICE
BE46694
8 x 10 M80 Sport Tab Trim
Plane Assembly
TPAM80
$122.99
BE46695
10 x 12 M120 Sport Tab
Trim Plane Assembly
TPAM120
$125.99
BE45452
M120 Std. Sport Trim
Plane Repl. - Plane Only
TPOM120
$79.99
BE45453
M80 Std. Sport Trim Plane
Repl. - Plane Only
TPOM80
$77.99
                             Bennett Standard Trim Plane Assemblies
Bennett trim planes are made of high-quality 304 stainless steel and remain strong and rigid,
even in the most challenging situations. Each trim plane assembly includes a trim plane,
backing plate and hinge for one side of the boat.
                           Bennett M80 & M120 Sport Tab Trim Plane Assemblies
Bennett trim planes are made of high-quality 304 stainless steel and remain strong and rigid,
even in the most challenging situations. Each trim plane assembly includes a trim plane,
backing plate and hinge for one side of the boat. TPOM80 & TPOM120 have trim plane only.
Trim Tab Hydraulic Hardware
Includes:
  • Two 3" brass pipe nipples
  • Two brass female elbows
  • Two tube bending clips
  • Six #14 x 1-1/2" full threaded screws
  • Four 1/4-20 x 3/4" machine screws
  • Eight nylon hangers
  • One mounting bracket with four #10 x 1" full-threaded screws
  • Two nuts with ferrules.
Cat. No. BE43646    Mfg. No.  H1170A       Cost  $28.99
Bennett HPU Mounting Bracket

Mounting Bracket for Hydraulic Power Unit
Cat. No. BE43647    Mfg. No.  H1179      Cost  $4.79
Bennett Wire Harness - 22'

22' Wire Harness WH1000
Cat. No. BE43649    Mfg. No.  WH1000      Cost  $29.99
Bennett Hydraulic Power Unit  Lexan Cover

Lexan cover protects electrohydraulic unit from occasional wash down.
Cat. No. BE32974    Mfg. No.  VP1138      Cost  $17.99
Bennett A1101 Actuator Assembly
Attractive, compact, water resistant and easy to install. The TPI helm
display accurately shows deflection percentage of each trim tab, and the
LED brightness is adjustable for any lighting condition. Works with all
Bennett Trim Tabs.
Cat. No. BE16913    Mfg. No.  A1101      Cost  $74.99
Bennett A1200S Actuator Assembly
Bennett actuators are strong but flexible nylon/fiberglass hydraulic
cylinders. The piston-like arms push tabs into position. Fluid flows
through a concealed hole in the upper hinge at the top of the actuator -
thus eliminating external hoses subject to damage.  A1200S is
designed for installations where space is limited.
Cat. No. BE16923    Mfg. No.  A1200S      Cost  $74.99
Bennett A1101EX Actuator Assembly External Line
Attractive, compact, water resistant and easy to install. The TPI helm
display accurately shows deflection percentage of each trim tab, and the
LED brightness is adjustable for any lighting condition. Works with all
Bennett Trim Tabs.
 A1101EX is an external line connection actuator used in cases of total
inaccessibility inside the transom. Unlike the standard actuator, the
external line hydraulics enter the transom by means of external tubing
above the waterline.
Cat. No. BE16914    Mfg. No.  A1101EX      Cost  $74.99
Bennett A1200SRC Actuator Assembly for M80 & M120
Bennett actuators are strong but flexible nylon/fiberglass hydraulic
cylinders. The piston-like arms push tabs into position. Fluid flows
through a concealed hole in the upper hinge at the top of the actuator -
thus eliminating external hoses subject to damage.  A1200SRC:
Actuator Assembly - Small Version for M80/M120 (w/ Rivet Clearance
on Lower Hinge)
Cat. No. BE16924   Mfg. No.  A1200SRC    Cost  $74.99
Bennett AR512 Auto Tab Retractor, 12V
Automatically retracts tabs when boat?s ignition is turned off. Trailered
or dry storage boats have added defense from trim tab damage with
them "full-up" during hauling, trailering and storage. Ensures trim tabs
are all the way up every time boat is started if boat is not equipped with
trim tab indicators. Easily installed under the instrument panel, the ATR
connects to the trim tab control and engine ignition switch.
Cat. No. BE16925    Mfg. No.  AR512      Cost  $64.99
Bennett AR512 Auto Tab Retractor,  24V
Automatically retracts tabs when boat's ignition is turned off. Trailered or
dry storage boats have added defense from trim tab damage with them
"full-up" during hauling, trailering and storage. Ensures trim tabs are all
the way up every time boat is started if boat is not equipped with trim tab
indicators. Easily installed under the instrument panel, the ATR connects
to the trim tab control and engine ignition switch.
Cat. No. BE16926    Mfg. No.  AR524      Cost  $64.99
Bennett VP1135R Solenoid Valve - Red
Solenoid valves direct the flow of fluid to the actuators. The solenoid
valves lock tightly to secure the tabs in place.
Cat. No. BE16930    Mfg. No.  VP1135R     Cost  $41.99
Bennett VP1135R Solenoid Valve - Green
Solenoid valves direct the flow of fluid to the actuators. The solenoid
valves lock tightly to secure the tabs in place.
Cat. No. BE16931    Mfg. No.  VP1135G     Cost  $41.99
Bennett T1125-20 Hydraulic Tubing - 20' Coil

Hydraulic Tubing - 20 foot coil
Cat. No. BE16932    Mfg. No.  T1125-20     Cost  $29.99
Bennett AutoTrim Pro Auto Tab Control Systems
Bennett AC3000 Auto Tab Control System
What is Auto Trim Pro?
AutoTrim Pro is an all-in-one trim tab control system that packs a boatload of essential features into an easy-to-use, space-saving keypad.

How it Works:
AutoTrim Pro automatically levels the pitch and roll of your boat, adjusting your trim tabs to changes in vessel speed, sea conditions and
shifting weight. Enjoy the convenience of riding in auto mode, or shift to full manual mode anytime.

Smart Features for a Smoother Ride:
•Auto Trim Tab Control allows you to store and access your preferences.
•Manual Tab Control is an automatic  override for full manual command.
•Trim Tab Position Indication is conveniently equipped with LED indicators.
•“All Up” and “All Down” Buttons allow for one-touch manual adjustments.
• Automatic Tab Retraction protects tabs during storage and trailering.
AutoTrim Pro for Hydraulic Tabs         Cat. No. BE64223     Mfg. No.  AP000A1HA        Cost  $422.99
AutoTrim Pro for Electric Tabs            Cat. No. BE64224      Mfg. No.  AP000A1BC        Cost  $422.99