______________________________________________________
 | |  |
______________________________________________________
______________________________________________________
847-373-1841
Auto Products
| IMPORTANT NOTE FOR ORDERS FROM OUTSIDE OF THE U.S.: Shipping charges for orders outside of the U.S. will be billed separately. International shipping is based on weight, size and destination country and are shipped via USPS Priority International Mail, unless requested otherwise or is prohibited by size or weight. |
| Product Selection: Basic Mounts Boating / RV Fishing Cup Holders Diving Dry Box/Misc. Electronic Mts. Auto |
Bomber
Finally, roof-top rack that's easy to install and won't damage your car! SeaSucker bike racks use our incredibly strong vacuum mounts and
allow you to temporarily but securely mount your bikes to the roof of your car without the hassle of permanently attaching any hardware.
SeaSuckers are non-marking, UV and weather resistant, and hold exceptionally well to glass or metal surfaces.
This rack has three fork clamps attached to six 6" SeaSuckers. Rack body made of 1/4" high-grade aluminum, which makes it strong
enough to hold your bikes yet flexible enough to follow the curve of your roof line. Approximate size: 43" x 11".
Finally, roof-top rack that's easy to install and won't damage your car! SeaSucker bike racks use our incredibly strong vacuum mounts and
allow you to temporarily but securely mount your bikes to the roof of your car without the hassle of permanently attaching any hardware.
SeaSuckers are non-marking, UV and weather resistant, and hold exceptionally well to glass or metal surfaces.
This rack has three fork clamps attached to six 6" SeaSuckers. Rack body made of 1/4" high-grade aluminum, which makes it strong
enough to hold your bikes yet flexible enough to follow the curve of your roof line. Approximate size: 43" x 11".
List Price $499.99 |
Bomber+
Finally, roof-top rack that's easy to install and won't damage your car! SeaSucker bike racks use our incredibly strong vacuum mounts and
allow you to temporarily but securely mount your bikes to the roof of your car without the hassle of permanently attaching any hardware.
SeaSuckers are non-marking, UV and weather resistant, and hold exceptionally well to glass or metal surfaces.
This model includes three 6" SeaSuckers with 1 1/2" wide hook-and-loop straps to secure your bikes' rear wheels and keep the tail from
sliding left or right. Recommended for high-wind areas!
This rack has three fork clamps attached to six 6" SeaSuckers. Rack body made of 1/4" high-grade aluminum, which makes it strong
enough to hold your bikes yet flexible enough to follow the curve of your roof line. Approximate size: 43" x 11".
Finally, roof-top rack that's easy to install and won't damage your car! SeaSucker bike racks use our incredibly strong vacuum mounts and
allow you to temporarily but securely mount your bikes to the roof of your car without the hassle of permanently attaching any hardware.
SeaSuckers are non-marking, UV and weather resistant, and hold exceptionally well to glass or metal surfaces.
This model includes three 6" SeaSuckers with 1 1/2" wide hook-and-loop straps to secure your bikes' rear wheels and keep the tail from
sliding left or right. Recommended for high-wind areas!
This rack has three fork clamps attached to six 6" SeaSuckers. Rack body made of 1/4" high-grade aluminum, which makes it strong
enough to hold your bikes yet flexible enough to follow the curve of your roof line. Approximate size: 43" x 11".
List Price $599.99 |
Falcon 1
You can't let your bike lie loose in the back of your truck, and you don't want to permanently mount a rack, so what can you do? Get a
SeaSucker rack, of course. Using our incredibly strong vacuum mounts, you can secure your bike in your truck bed without the hassle of
permanently attaching any hardware. SeaSuckers are non-marking, UV and weather resistant, and hold exceptionally well to glass or metal
surfaces. This rack has a single fork clamp attached to two 4 1/2" SeaSuckers and is designed to be mounted to your truck's rear window.
Approximate width: 12".
You can't let your bike lie loose in the back of your truck, and you don't want to permanently mount a rack, so what can you do? Get a
SeaSucker rack, of course. Using our incredibly strong vacuum mounts, you can secure your bike in your truck bed without the hassle of
permanently attaching any hardware. SeaSuckers are non-marking, UV and weather resistant, and hold exceptionally well to glass or metal
surfaces. This rack has a single fork clamp attached to two 4 1/2" SeaSuckers and is designed to be mounted to your truck's rear window.
Approximate width: 12".
List Price $139.99 |
Raptor+
Finally, roof-top rack that's easy to install and won't damage your car! SeaSucker bike racks use our incredibly strong vacuum mounts and
allow you to temporarily but securely mount your bikes to the roof of your car without the hassle of permanently attaching any hardware.
SeaSuckers are non-marking, UV and weather resistant, and hold exceptionally well to glass or metal surfaces.
This rack has one fork clamp attached to three 6" SeaSuckers in a straight pattern. Rack body made of 3/16" high-grade powder-coated
aluminum, which makes it strong enough to hold your bike yet flexible enough to follow the curve of your roof line. Designed to mount to
your roof, on your trunk, on your hatchback, or wherever you have space for it. There are slots and holes at either side for straps or
bungees, for tie down or security. Approximate size: 20"x6".
The Raptor+ comes with one Rear Wheel Strap (BV1001) for stabilizing the read wheel on a rooftop or trunk-mount application.
So, you might be thinking "What's the difference between the Talon and the Raptor?" They're both single bikes racks with three
SeaSuckers, but which one you buy depends on what you have room for. The Raptor's vacuum cups are in a row, so they can fit in
between a sunroof and windshield, for instance, or on a particularly thin trunk. The Talon is in more of a triangular pattern, which gives
more front-to-back stability, but takes up a little more space.
Finally, roof-top rack that's easy to install and won't damage your car! SeaSucker bike racks use our incredibly strong vacuum mounts and
allow you to temporarily but securely mount your bikes to the roof of your car without the hassle of permanently attaching any hardware.
SeaSuckers are non-marking, UV and weather resistant, and hold exceptionally well to glass or metal surfaces.
This rack has one fork clamp attached to three 6" SeaSuckers in a straight pattern. Rack body made of 3/16" high-grade powder-coated
aluminum, which makes it strong enough to hold your bike yet flexible enough to follow the curve of your roof line. Designed to mount to
your roof, on your trunk, on your hatchback, or wherever you have space for it. There are slots and holes at either side for straps or
bungees, for tie down or security. Approximate size: 20"x6".
The Raptor+ comes with one Rear Wheel Strap (BV1001) for stabilizing the read wheel on a rooftop or trunk-mount application.
So, you might be thinking "What's the difference between the Talon and the Raptor?" They're both single bikes racks with three
SeaSuckers, but which one you buy depends on what you have room for. The Raptor's vacuum cups are in a row, so they can fit in
between a sunroof and windshield, for instance, or on a particularly thin trunk. The Talon is in more of a triangular pattern, which gives
more front-to-back stability, but takes up a little more space.
List Price $269.99 |
Talon
Finally, roof-top rack that's easy to install and won't damage your car! SeaSucker bike racks use our incredibly strong vacuum mounts and
allow you to temporarily but securely mount your bikes to the roof of your car without the hassle of permanently attaching any hardware.
SeaSuckers are non-marking, UV and weather resistant, and hold exceptionally well to glass or metal surfaces.
This rack has one fork clamp attached to three 6" SeaSuckers in a triangle pattern. Rack body made of 3/16" high-grade anodized
aluminum, which makes it strong enough to hold your bike yet flexible enough to follow the curve of your roof line. Designed to mount to
your roof and front windshield, but can be used just about anywhere - on the roof, on the trunk, etc. Approximate size: 15" x 12".
Note: this model does NOT include rear wheel strap (BV1001).
So, you might be thinking "What's the difference between the Talon and the Raptor?" They're both single bikes racks with three
SeaSuckers, but which one you buy depends on what you have room for. The Raptor's vacuum cups are in a row, so they can fit in
between a sunroof and windshield, for instance, or on a particularly thin trunk. The Talon is in more of a triangular pattern, which gives
more front-to-back stability, but takes up a little more space.
Finally, roof-top rack that's easy to install and won't damage your car! SeaSucker bike racks use our incredibly strong vacuum mounts and
allow you to temporarily but securely mount your bikes to the roof of your car without the hassle of permanently attaching any hardware.
SeaSuckers are non-marking, UV and weather resistant, and hold exceptionally well to glass or metal surfaces.
This rack has one fork clamp attached to three 6" SeaSuckers in a triangle pattern. Rack body made of 3/16" high-grade anodized
aluminum, which makes it strong enough to hold your bike yet flexible enough to follow the curve of your roof line. Designed to mount to
your roof and front windshield, but can be used just about anywhere - on the roof, on the trunk, etc. Approximate size: 15" x 12".
Note: this model does NOT include rear wheel strap (BV1001).
So, you might be thinking "What's the difference between the Talon and the Raptor?" They're both single bikes racks with three
SeaSuckers, but which one you buy depends on what you have room for. The Raptor's vacuum cups are in a row, so they can fit in
between a sunroof and windshield, for instance, or on a particularly thin trunk. The Talon is in more of a triangular pattern, which gives
more front-to-back stability, but takes up a little more space.
List Price $219.99 |
Talon+
Finally, roof-top rack that's easy to install and won't damage your car! SeaSucker bike racks use our incredibly strong vacuum mounts and
allow you to temporarily but securely mount your bikes to the roof of your car without the hassle of permanently attaching any hardware.
SeaSuckers are non-marking, UV and weather resistant, and hold exceptionally well to glass or metal surfaces.
This model includes one 6" SeaSucker with hook-and-loop straps to secure your bike's rear wheel and keep the tail from sliding left or right.
This rack has one fork clamp attached to three 6" SeaSuckers. Rack body made of 3/16" high-grade anodized aluminum, which makes it
strong enough to hold your bike yet flexible enough to follow the curve of your roof line. Designed to mount to your roof and front
windshield, but can be used just about anywhere - on the roof, on the trunk, etc. Approximate size: 15" x 12".
So, you might be thinking "What's the difference between the Talon and the Raptor?" They're both single bikes racks with three
SeaSuckers, but which one you buy depends on what you have room for. The Raptor's vacuum cups are in a row, so they can fit in
between a sunroof and windshield, for instance, or on a particularly thin trunk. The Talon is in more of a triangular pattern, which gives
more front-to-back stability, but takes up a little more space.
Finally, roof-top rack that's easy to install and won't damage your car! SeaSucker bike racks use our incredibly strong vacuum mounts and
allow you to temporarily but securely mount your bikes to the roof of your car without the hassle of permanently attaching any hardware.
SeaSuckers are non-marking, UV and weather resistant, and hold exceptionally well to glass or metal surfaces.
This model includes one 6" SeaSucker with hook-and-loop straps to secure your bike's rear wheel and keep the tail from sliding left or right.
This rack has one fork clamp attached to three 6" SeaSuckers. Rack body made of 3/16" high-grade anodized aluminum, which makes it
strong enough to hold your bike yet flexible enough to follow the curve of your roof line. Designed to mount to your roof and front
windshield, but can be used just about anywhere - on the roof, on the trunk, etc. Approximate size: 15" x 12".
So, you might be thinking "What's the difference between the Talon and the Raptor?" They're both single bikes racks with three
SeaSuckers, but which one you buy depends on what you have room for. The Raptor's vacuum cups are in a row, so they can fit in
between a sunroof and windshield, for instance, or on a particularly thin trunk. The Talon is in more of a triangular pattern, which gives
more front-to-back stability, but takes up a little more space.
List Price $249.99 |
Rear Wheel Strap
A single 6" SeaSucker with a 1 1/2" wide hook-and-loop strap to secure your bike's rear wheel and keep the tail from sliding left or right.
Recommended for high-wind areas!
SeaSuckers are non-marking, UV and weather resistant, and hold exceptionally well to glass or metal surfaces.
A single 6" SeaSucker with a 1 1/2" wide hook-and-loop strap to secure your bike's rear wheel and keep the tail from sliding left or right.
Recommended for high-wind areas!
SeaSuckers are non-marking, UV and weather resistant, and hold exceptionally well to glass or metal surfaces.
List Price $49.99 |