______________________________________________________
 | |  |
______________________________________________________
______________________________________________________
847-373-1841
| SeaSucker Products |
Boating / RV Applications
Transducer Mount
Got a new depth finder or fish finder
and you don't want to permanently
mount the transducer? Use
SeaSucker's new transducer mount!
Two of our 110lb.-rated 4 1/2"
SeaSucker attached to and anodized
aluminum bar. The bar has two 1/8"
holes pre-drilled for for the
transducer, but you may need to drill
additional holes to match the screw
pattern on your transducer.
Got a new depth finder or fish finder
and you don't want to permanently
mount the transducer? Use
SeaSucker's new transducer mount!
Two of our 110lb.-rated 4 1/2"
SeaSucker attached to and anodized
aluminum bar. The bar has two 1/8"
holes pre-drilled for for the
transducer, but you may need to drill
additional holes to match the screw
pattern on your transducer.
| List Price $115.99 |
Medium-Duty Handle
Our custom-made handle with two 4
1/2" SeaSuckers is rated to hold over
200 lbs! That's a lot of pulling power.
Use it as an extra hand-hold or grab
bar, or use it like we do - as a carrying
handle. We attach it to the side of our
heavy displays and carry them in and
out of the boating and fishing shows
we do. The starboard handle is
pre-drilled for adding extra
attachments, such as a cleat.
Our custom-made handle with two 4
1/2" SeaSuckers is rated to hold over
200 lbs! That's a lot of pulling power.
Use it as an extra hand-hold or grab
bar, or use it like we do - as a carrying
handle. We attach it to the side of our
heavy displays and carry them in and
out of the boating and fishing shows
we do. The starboard handle is
pre-drilled for adding extra
attachments, such as a cleat.
Tarp Clip on 4 1/2"
SeaSucker
Screw-action tarp clip clamps down on
tarps and just about anything else you
need to secure. These are perfect for
complying with California's Clean
Marina Program (which basically says
that you have to cover the water when
doing hull work) - attach these to the
hull every 8 to 10 feet and clip on a
tarp or big sheet of bubble wrap to
keep dust and debris from
contaminating the water. Sturdy black
plastic clip screws tight and hangs
from the SeaSucker's aluminum
handle.
SeaSucker
Screw-action tarp clip clamps down on
tarps and just about anything else you
need to secure. These are perfect for
complying with California's Clean
Marina Program (which basically says
that you have to cover the water when
doing hull work) - attach these to the
hull every 8 to 10 feet and clip on a
tarp or big sheet of bubble wrap to
keep dust and debris from
contaminating the water. Sturdy black
plastic clip screws tight and hangs
from the SeaSucker's aluminum
handle.
FlexLight Duo
The SeaSucker FlexLight Duo is a
waterproof LED light on a flexible stalk
attached to a 4 1/2" SeaSucker. We
call this one the Duo because it
provides both white and red light. The
red light saves your night vision where
you just need to take a quick look at
something. The flexible stalk allows
the light to be positioned wherever
needed. Whether you’re night fishing,
cruising or just hanging out, the
SeaSucker FlexLight Duo gives you
the extra illumination you need,
wherever you need it.
The SeaSucker FlexLight Duo is a
waterproof LED light on a flexible stalk
attached to a 4 1/2" SeaSucker. We
call this one the Duo because it
provides both white and red light. The
red light saves your night vision where
you just need to take a quick look at
something. The flexible stalk allows
the light to be positioned wherever
needed. Whether you’re night fishing,
cruising or just hanging out, the
SeaSucker FlexLight Duo gives you
the extra illumination you need,
wherever you need it.
Barbecue Grill Mounts
Attention Magma Grill owners –
SeaSucker has a better way to mount
your grill! Rest it safely on your
gunwale and secure it with
SeaSuckers. SeaSucker’s grill mount
package comes with two 4½”
SeaSuckers attached to our 1/8”-thick
stainless steel “L” brackets. “L”
brackets are slotted for ease of
positioning; simply attach the brackets
to the factory holes in the bottom of
your grill with the included stainless
steel hardware.
Attention Magma Grill owners –
SeaSucker has a better way to mount
your grill! Rest it safely on your
gunwale and secure it with
SeaSuckers. SeaSucker’s grill mount
package comes with two 4½”
SeaSuckers attached to our 1/8”-thick
stainless steel “L” brackets. “L”
brackets are slotted for ease of
positioning; simply attach the brackets
to the factory holes in the bottom of
your grill with the included stainless
steel hardware.
Heavy-Duty Handle
Our large handle with two 6"
SeaSuckers has more holding power
than you'll likely ever use - it's rated to
hold over 400 lbs! That's a lot of
pulling power! Use it as an extra
hand-hold, carrying handle or grab
bar, or even a temporary step if you
attach a couple of our buttresses. The
3/4" starboard handle is pre-drilled for
adding extra attachments, such as a
cleat.
Our large handle with two 6"
SeaSuckers has more holding power
than you'll likely ever use - it's rated to
hold over 400 lbs! That's a lot of
pulling power! Use it as an extra
hand-hold, carrying handle or grab
bar, or even a temporary step if you
attach a couple of our buttresses. The
3/4" starboard handle is pre-drilled for
adding extra attachments, such as a
cleat.
| List Price $124.99 |
| List Price $109.99 |
| List Price $109.99 |
| List Price $149.99 |
Medium Table with 6"
SeaSucker
Our new custom-designed table does
multiple duty - use it to cut bait and rig
lines, to filet your catch or to serve it
up to your guests. Made of 1/2" white
starboard, this table is incredibly
sturdy, and with the 6" SeaSucker,
you can mount this table directly on
top of your gunwale. Open corners
allow you to easily dispose of waste
and knife slots provide convenient and
safe storage. Work surface is
approximately 22" x 12". See our
Medium Table with "L" Bracket for
mounting your table with the
SeaSucker vertically.
SeaSucker
Our new custom-designed table does
multiple duty - use it to cut bait and rig
lines, to filet your catch or to serve it
up to your guests. Made of 1/2" white
starboard, this table is incredibly
sturdy, and with the 6" SeaSucker,
you can mount this table directly on
top of your gunwale. Open corners
allow you to easily dispose of waste
and knife slots provide convenient and
safe storage. Work surface is
approximately 22" x 12". See our
Medium Table with "L" Bracket for
mounting your table with the
SeaSucker vertically.
| List Price $61.99 |
| List Price $149.99 |
Medium Table with "L"
Bracket
This table is the same as our Medium
Table with 6" SeaSucker, but with a
different mount - instead of attaching
the SeaSucker directly to your
gunwale, this table has an "L" bracket
that allows you to mount the included
4½" SeaSucker to the inside wall in a
vertical position. Use this
custom-designed table to cut bait and
rig lines, to filet your catch or to serve
it up to your guests. Made of 1/2" white
starboard, this table is incredibly
sturdy. Open corners allow you to
easily dispose of waste and knife slots
in the back corners provide convenient
and safe storage. Work surface is
approximately 22" x 12".
Bracket
This table is the same as our Medium
Table with 6" SeaSucker, but with a
different mount - instead of attaching
the SeaSucker directly to your
gunwale, this table has an "L" bracket
that allows you to mount the included
4½" SeaSucker to the inside wall in a
vertical position. Use this
custom-designed table to cut bait and
rig lines, to filet your catch or to serve
it up to your guests. Made of 1/2" white
starboard, this table is incredibly
sturdy. Open corners allow you to
easily dispose of waste and knife slots
in the back corners provide convenient
and safe storage. Work surface is
approximately 22" x 12".
Large Table with Two 4 1/2"
SeaSuckers
This table has room to do it all -
on-board filleting, bait prep, or even
serving up the catch of the day. Made
of 1/2" white starboard, this table is
incredibly sturdy. Relies on the holding
power of two 4 1/2" SeaSuckers, which
allow you to mount this table directly
on top of your gunwale, or combine it
with two of our large "L" Brackets for
side mounting. Open corners let you
easily dispose of waste and knife slots
provide convenient and safe storage.
Work surface is approximately 15"
deep by 34" wide.
SeaSuckers
This table has room to do it all -
on-board filleting, bait prep, or even
serving up the catch of the day. Made
of 1/2" white starboard, this table is
incredibly sturdy. Relies on the holding
power of two 4 1/2" SeaSuckers, which
allow you to mount this table directly
on top of your gunwale, or combine it
with two of our large "L" Brackets for
side mounting. Open corners let you
easily dispose of waste and knife slots
provide convenient and safe storage.
Work surface is approximately 15"
deep by 34" wide.
| List Price $151.99 |
| List Price $239.99 |
Winch Handle Holder
Sailors - you asked for it and we
delivered! Rather than mounting a
pocket for you winch handles
permanently on the side of your boat,
use our new winch handle holder. A 4
1/2" SeaSucker holds it securely to
your boat and allows you to move it
within easy reach wherever you need
it. Flexible white plastic, approximately
2"x3"x9".
Sailors - you asked for it and we
delivered! Rather than mounting a
pocket for you winch handles
permanently on the side of your boat,
use our new winch handle holder. A 4
1/2" SeaSucker holds it securely to
your boat and allows you to move it
within easy reach wherever you need
it. Flexible white plastic, approximately
2"x3"x9".
| List Price $74.99 |
Single Tank Strap
A large, black-rubber strap mounted
on a 1/8" thick stainless steel bar and
then screwed to a powerful 6"
SeaSucker. Multi-step strapping
capability lets this unit hold items as
small as a fire extinguisher and as
large as an 80-sized dive tank.
A large, black-rubber strap mounted
on a 1/8" thick stainless steel bar and
then screwed to a powerful 6"
SeaSucker. Multi-step strapping
capability lets this unit hold items as
small as a fire extinguisher and as
large as an 80-sized dive tank.
Medium Strap on 4 1/2"
SeaSucker
Medium rubber clamp with adjustable
strap attached to a 4½" SeaSucker;
holds objects with diameters ranging
from 1" to 2½". Ideal for gaffs, nets,
push poles, etc.
SeaSucker
Medium rubber clamp with adjustable
strap attached to a 4½" SeaSucker;
holds objects with diameters ranging
from 1" to 2½". Ideal for gaffs, nets,
push poles, etc.
| List Price $89.99 |
| List Price $56.99 |
| IMPORTANT NOTE FOR ORDERS FROM OUTSIDE OF THE U.S.: Shipping charges for orders outside of the U.S. will be billed separately. International shipping is based on weight, size and destination country and are shipped via USPS Priority International Mail, unless requested otherwise or is prohibited by size or weight. |
| Product Selection: Basic Mounts Boating / RV Fishing Cup Holders Diving Dry Box/Misc. Electronic Mts. Auto |
4 -1/2" SeaSucker with
Tentacle
The same product as our basic 4 1/2"
SeaSucker, but with the added
flexibility of a 34" tentacle threaded
through the housing instead of a
plastic handle. Wrap the tentacle
aroung loose items on the boat, like
coolers, tackle boxes, buckets, etc., or
use it to tie off an extra bumber to
protect your paint and gel coat.
Tentacle
The same product as our basic 4 1/2"
SeaSucker, but with the added
flexibility of a 34" tentacle threaded
through the housing instead of a
plastic handle. Wrap the tentacle
aroung loose items on the boat, like
coolers, tackle boxes, buckets, etc., or
use it to tie off an extra bumber to
protect your paint and gel coat.
6" SeaSucker
The 6" SeaSucker vacuum cup is
rated to hold up to 210 pounds. Our
custom housing has two slotted
holes for backplating accessories or
mounting hardware and one center
stainless steel insert for mounting
anything with a standard ¼-20
machine screw. All metal parts are
high-grade stainless steel (even the
springs inside our pump) for extra
durability in the saltwater
environment. Includes our standard
plastic housing handle.
The 6" SeaSucker vacuum cup is
rated to hold up to 210 pounds. Our
custom housing has two slotted
holes for backplating accessories or
mounting hardware and one center
stainless steel insert for mounting
anything with a standard ¼-20
machine screw. All metal parts are
high-grade stainless steel (even the
springs inside our pump) for extra
durability in the saltwater
environment. Includes our standard
plastic housing handle.
| List Price $50.99 |
| List Price $67.99 |
4-1/2" SeaSucker
Back-to-Back Mount
Two 4 1/2" SeaSuckers pre-attached
back-to-back; allows you to quickly and
easily secure items to your console or
side wall. Attach fishing tackle trays,
coolers, buckets, lights, tools boxes,
drink or food trays, fillet tables,
electronics or virtually any other item to
your boat.
Back-to-Back Mount
Two 4 1/2" SeaSuckers pre-attached
back-to-back; allows you to quickly and
easily secure items to your console or
side wall. Attach fishing tackle trays,
coolers, buckets, lights, tools boxes,
drink or food trays, fillet tables,
electronics or virtually any other item to
your boat.
6" Seasucker
Back-to-Back Mount
Two 6" SeaSuckers pre-attached
back-to-back; allows you to quickly
and easily secure items to your
console or side wall. Even more
holding power than our 4 1/2"
SeaSucker BB. Attach fishing tackle
trays, coolers, buckets, lights, tools
boxes, drink or food trays, fillet
tables, electronics or virtually any
other item to your boat.
Back-to-Back Mount
Two 6" SeaSuckers pre-attached
back-to-back; allows you to quickly
and easily secure items to your
console or side wall. Even more
holding power than our 4 1/2"
SeaSucker BB. Attach fishing tackle
trays, coolers, buckets, lights, tools
boxes, drink or food trays, fillet
tables, electronics or virtually any
other item to your boat.
| List Price $99.99 |
| List Price $139.99 |
| List Price $57.99 |
Utility Hook
We know you already have a use for
this all-purpose hook, whether it's for
holding dock lines, a life ring or
whatever. Made of strong UV-stable
plastic, the 1 1/4" wide hook has an
opening spread of approximately 3
3/4". Comes pre-attached to a powerful
4 1/2" SeaSucker.
We know you already have a use for
this all-purpose hook, whether it's for
holding dock lines, a life ring or
whatever. Made of strong UV-stable
plastic, the 1 1/4" wide hook has an
opening spread of approximately 3
3/4". Comes pre-attached to a powerful
4 1/2" SeaSucker.
| List Price $76.99 |
Binoculars Pocket
This soft plastic pocket was made to
hold binoculars but is also great for
general storage. Drain holes at the
bottom keep it from filling with water.
Approximate size: 9" x 2 3/4" x 8". Come
pre-attached to a 4 1/2" SeaSucker for
put-it-anywhere convenience.
This soft plastic pocket was made to
hold binoculars but is also great for
general storage. Drain holes at the
bottom keep it from filling with water.
Approximate size: 9" x 2 3/4" x 8". Come
pre-attached to a 4 1/2" SeaSucker for
put-it-anywhere convenience.
Medium Strap on 4 1/2"
SeaSucker
Medium rubber clamp with adjustable
strap attached to a 4½" SeaSucker;
holds objects with diameters ranging
from 1" to 2½". Ideal for gaffs, nets,
push poles, etc.
SeaSucker
Medium rubber clamp with adjustable
strap attached to a 4½" SeaSucker;
holds objects with diameters ranging
from 1" to 2½". Ideal for gaffs, nets,
push poles, etc.
| List Price $56.99 |
Large Table with Two 4 1/2"
SeaSuckers and "L" Brackets
This table has room to do it all -
on-board filleting, bait prep, or even
serving up the catch of the day. Made
of 1/2" white starboard, this table is
incredibly sturdy. Relies on the holding
power of two 4 1/2" SeaSuckers, which
allow you to mount this table directly on
top of your gunwale, or combine it with
the included large "L" Brackets for side
mounting. Open corners let you easily
dispose of waste and knife slots provide
convenient and safe storage. Work
surface is approximately 15" deep by
34" wide.
SeaSuckers and "L" Brackets
This table has room to do it all -
on-board filleting, bait prep, or even
serving up the catch of the day. Made
of 1/2" white starboard, this table is
incredibly sturdy. Relies on the holding
power of two 4 1/2" SeaSuckers, which
allow you to mount this table directly on
top of your gunwale, or combine it with
the included large "L" Brackets for side
mounting. Open corners let you easily
dispose of waste and knife slots provide
convenient and safe storage. Work
surface is approximately 15" deep by
34" wide.
| List Price $265.99 |