______________________________________________________
 | |  |
______________________________________________________
______________________________________________________
847-373-1841
Cup Holders
Yoebi Stemware Holder
Nargiboy's incredibly innovative Yoebi
stemware holder lets you hold your
wine glass, margarita glass, martini
glass and other stemware easily yet
securely. The Yoebi slides right in to
the 3 1/2" (approx. inside diameter)
cup holder already on your boat (or
available from SeaSucker). Holds most
stemware with bases up to 3 1/8".
Color: white.
Nargiboy's incredibly innovative Yoebi
stemware holder lets you hold your
wine glass, margarita glass, martini
glass and other stemware easily yet
securely. The Yoebi slides right in to
the 3 1/2" (approx. inside diameter)
cup holder already on your boat (or
available from SeaSucker). Holds most
stemware with bases up to 3 1/8".
Color: white.
| List Price $7.99 |
2-Cup Holder - Horizontal
Mount
Our 2-Cup Holders are the baby
brothers of our super-popular 4-Cup
Holders. Its cup inserts are designed to
hold 2 cans or bottles in foam koozies,
or you can swap out one of the cup
holder inserts for a Small Dry Box (a
small waterproof storage box for your
wallet, cell phone, PDA, etc.) for an
extra charge. Made of 3/4" starboard
pre-attached to a 4½" SeaSucker. This
one is horizontal mount - use it on flat
surfaces like your console.
Once you order you cup holder, don't
forget to accessorize! If you're a wine,
martini or margarita drinker, get the
Yoebi Stemware Holder.
Mount
Our 2-Cup Holders are the baby
brothers of our super-popular 4-Cup
Holders. Its cup inserts are designed to
hold 2 cans or bottles in foam koozies,
or you can swap out one of the cup
holder inserts for a Small Dry Box (a
small waterproof storage box for your
wallet, cell phone, PDA, etc.) for an
extra charge. Made of 3/4" starboard
pre-attached to a 4½" SeaSucker. This
one is horizontal mount - use it on flat
surfaces like your console.
Once you order you cup holder, don't
forget to accessorize! If you're a wine,
martini or margarita drinker, get the
Yoebi Stemware Holder.
2-Cup Holder - Vertical
Mount
NOW FEATURING OUR NEW "LOW
PROFILE" DESIGN! Our 2-Cup
Holders are the baby brothers of
our super-popular 4-Cup Holders.
Its cup inserts are designed to hold
2 cans or bottles in foam koozies,
or you can swap out one of the cup
holder inserts for a Small Dry Box
(a small waterproof storage box for
your wallet, cell phone, PDA, etc.)
for an extra charge. Made of 3/4"
starboard pre-attached to a 4½"
SeaSucker. This one is vertical
mount - use it on vertical surfaces
like the walls of your console or
your sidewalls.
Once you order you cup holder,
don't forget to accessorize! If you're
a wine, martini or margarita drinker,
get the Yoebi Stemware Holder.
Mount
NOW FEATURING OUR NEW "LOW
PROFILE" DESIGN! Our 2-Cup
Holders are the baby brothers of
our super-popular 4-Cup Holders.
Its cup inserts are designed to hold
2 cans or bottles in foam koozies,
or you can swap out one of the cup
holder inserts for a Small Dry Box
(a small waterproof storage box for
your wallet, cell phone, PDA, etc.)
for an extra charge. Made of 3/4"
starboard pre-attached to a 4½"
SeaSucker. This one is vertical
mount - use it on vertical surfaces
like the walls of your console or
your sidewalls.
Once you order you cup holder,
don't forget to accessorize! If you're
a wine, martini or margarita drinker,
get the Yoebi Stemware Holder.
| List Price $79.99 |
| List Price $79.99 |
4-Cup Holder - Horizontal
Mount
Our new 4-Cup Holder harnesses the
power of a 4 1/2" SeaSucker to hold 4
cans or bottles in foam koozies. Made
of 3/4" starboard with 4 white plastic
cup holder inserts, or you can swap out
one of the cup holder inserts for a
Small Dry Box (a small waterproof
storage box for your wallet, cell phone,
PDA, etc.) for an extra charge.
Horizontal mount - use this cup holder
on flat surfaces like your console. Once
you order you cup holder, don't forget
to accessorize! If you're a wine, martini
or margarita drinker, get the Yoebi
Stemware Holder.
Mount
Our new 4-Cup Holder harnesses the
power of a 4 1/2" SeaSucker to hold 4
cans or bottles in foam koozies. Made
of 3/4" starboard with 4 white plastic
cup holder inserts, or you can swap out
one of the cup holder inserts for a
Small Dry Box (a small waterproof
storage box for your wallet, cell phone,
PDA, etc.) for an extra charge.
Horizontal mount - use this cup holder
on flat surfaces like your console. Once
you order you cup holder, don't forget
to accessorize! If you're a wine, martini
or margarita drinker, get the Yoebi
Stemware Holder.
4-Cup Holder - Vertical
Mount
Our new 4-Cup Holder harnesses
the power of a 4 1/2" SeaSucker to
hold 4 cans or bottles in foam
koozies. Made of 3/4" starboard
with 4 white plastic cup holder
inserts, or you can swap out one of
the cup holder inserts for a Small
Dry Box (a small waterproof storage
box for your wallet, cell phone, PDA,
etc.) for an extra charge. Vertical
mount - use this cup holder on the
front or side of your console or
other vertical surfaces.
Mount
Our new 4-Cup Holder harnesses
the power of a 4 1/2" SeaSucker to
hold 4 cans or bottles in foam
koozies. Made of 3/4" starboard
with 4 white plastic cup holder
inserts, or you can swap out one of
the cup holder inserts for a Small
Dry Box (a small waterproof storage
box for your wallet, cell phone, PDA,
etc.) for an extra charge. Vertical
mount - use this cup holder on the
front or side of your console or
other vertical surfaces.
| List Price $94.99 |
| List Price $94.99 |
PartySucker Snap-a-Cap
It's called Snap-a-Cap because that's
what it does - push your beer bottle in
and the cap snaps right off! Great for
the boat, tailgate parties or even your
fridge. Never misplace your opener
again because it will be right where you
stuck it! Its cam-operated vacuum cup
gives it holding power far superior to a
mere suction cup.
It's called Snap-a-Cap because that's
what it does - push your beer bottle in
and the cap snaps right off! Great for
the boat, tailgate parties or even your
fridge. Never misplace your opener
again because it will be right where you
stuck it! Its cam-operated vacuum cup
gives it holding power far superior to a
mere suction cup.
PartySucker Combo Pack
Our PartySucker cup holder and
bottle opener in one package. The
cup holder comes with a free
PartySucker can koozie. Both use
cam-operated vacuum cups that
give them holding power that is far
superior to mere suction cups.
Our PartySucker cup holder and
bottle opener in one package. The
cup holder comes with a free
PartySucker can koozie. Both use
cam-operated vacuum cups that
give them holding power that is far
superior to mere suction cups.
| List Price $24.99 |
| List Price $12.99 |
| List Price $12.49 |
PartySucker Cup Holder
Finally, a cup holder that really works!
Its cam-operated vacuum cup gives it
holding power far superior to a mere
suction cup. Great for the boat, the car,
or whereever else you want to attach it.
Comes with a free koozie.
Finally, a cup holder that really works!
Its cam-operated vacuum cup gives it
holding power far superior to a mere
suction cup. Great for the boat, the car,
or whereever else you want to attach it.
Comes with a free koozie.
| List Price $8.99 |
Cup Holder Adapter
Its the same gimbal-mount cup
holder used in our PartySucker Cup
Holder, but adapted for use with a
SeaSucker for the ultimate in
drink-holding power. Simply screw
the 1/4-20 bolt into the center hole
of your SeaSucker and you've got
an instant vacuum-mount cup holder.
Its the same gimbal-mount cup
holder used in our PartySucker Cup
Holder, but adapted for use with a
SeaSucker for the ultimate in
drink-holding power. Simply screw
the 1/4-20 bolt into the center hole
of your SeaSucker and you've got
an instant vacuum-mount cup holder.
| IMPORTANT NOTE FOR ORDERS FROM OUTSIDE OF THE U.S.: Shipping charges for orders outside of the U.S. will be billed separately. International shipping is based on weight, size and destination country and are shipped via USPS Priority International Mail, unless requested otherwise or is prohibited by size or weight. |
DrinX Cup Holder Insert
The DrinX inserts are great - not only
do they fit perfectly into our cup holder
inserts, they provide a thick layer of
insulation for your drink and they give
your average can or bottle a nice,
snug fit. The basic 3 1/2" cup holder
opening leaves room for a can or
bottle to rattle around, but not with
DrinX. Choose your color: blue or gray.
The DrinX inserts are great - not only
do they fit perfectly into our cup holder
inserts, they provide a thick layer of
insulation for your drink and they give
your average can or bottle a nice,
snug fit. The basic 3 1/2" cup holder
opening leaves room for a can or
bottle to rattle around, but not with
DrinX. Choose your color: blue or gray.
| List Price $12.99 |
| Product Selection: Basic Mounts Boating / RV Fishing Cup Holders Diving Dry Box/Misc. Electronic Mts. Auto |
3-Cup Holder - Vertical
Mount
Our 3-Cup Holder mounts to a vertical
surface and can hold 3 cans or
bottles, or swap out one or more of
the cup holder inserts for a Small Dry
Box for holding you keys, wallet, cell
phone, etc. Made of white 3/4"
starboard, pre-mounted to a powerful
4 1/2" SeaSucker.
Mount
Our 3-Cup Holder mounts to a vertical
surface and can hold 3 cans or
bottles, or swap out one or more of
the cup holder inserts for a Small Dry
Box for holding you keys, wallet, cell
phone, etc. Made of white 3/4"
starboard, pre-mounted to a powerful
4 1/2" SeaSucker.
| List Price $82.99 |
2-Cup Holder - Angle Mount
If you have an angled console, you
can still attach a SeaSucker cup
holder. Our stainless steel angle
adjuster on this cup holder gives you
enough travel to make up for the
angle and level oout your cup holder.
Its cup inserts are designed to hold 2
cans or bottles in foam koozies, or
you can swap out one of the cup
holder inserts for a Small Dry Box (a
small waterproof storage box for your
wallet, cell phone, PDA, etc.) for an
extra charge. Made of 3/4" starboard
pre-attached to a 4½" SeaSucker.
This one is horizontal mount - use it
on flat surfaces like your console.
If you have an angled console, you
can still attach a SeaSucker cup
holder. Our stainless steel angle
adjuster on this cup holder gives you
enough travel to make up for the
angle and level oout your cup holder.
Its cup inserts are designed to hold 2
cans or bottles in foam koozies, or
you can swap out one of the cup
holder inserts for a Small Dry Box (a
small waterproof storage box for your
wallet, cell phone, PDA, etc.) for an
extra charge. Made of 3/4" starboard
pre-attached to a 4½" SeaSucker.
This one is horizontal mount - use it
on flat surfaces like your console.
| List Price $89.99 |
4-Cup Holder with Large Dry
Box
This 4-cup holder also includes a slot
for our Large Dry Box, giving you
storage for several people's wallets, cell
phones, keys, cameras, etc. A clear
large dry box is included in the package
- you do not need to order one
separately. Held in place by one 4 1/2"
SeaSucker. Box size: 7.5"x3.5"x3.5"
(approx). Approximate cup holder
overall dimensions: 19" x 10".
Box
This 4-cup holder also includes a slot
for our Large Dry Box, giving you
storage for several people's wallets, cell
phones, keys, cameras, etc. A clear
large dry box is included in the package
- you do not need to order one
separately. Held in place by one 4 1/2"
SeaSucker. Box size: 7.5"x3.5"x3.5"
(approx). Approximate cup holder
overall dimensions: 19" x 10".
| List Price $115.99 |
Party Barge
If you don't love to party, this might not be
the right product for you. May we suggest
our 4-Cup Holder instead? If you DO love
to party, read on ...
The Party Barge attaches to a horizontal
surface, like a table top or console top, and
keeps your bottles and cups from finding
their way to the deck. The five deep 3 1/2"
cup holders handle your cans and bottles
in coozies, cups and wine glasses.
All the cup holder slots are cut to
accommodate our Small Dry Box, which, as
it turns out, is a great way to keep olives,
maraschino cherries and other drink
necessities fresh. A raised ring on the top
corrals your limes.
The center bottle hole is approx. 4 3/8"
diameter and fits a 2-liter mixer bottle
perfectly. The two outer bottle holes are
approx. 5 1/8" diameter and fit 1.75 liter
booze bottles, plus they have adjustable
arms with locking knobs to clamp down on
smaller bottles if for some strange reason
you don't buy the bigger bottles of rum,
vodka, gin, etc.
Approx. 22 1/2" x 16', machined from 3/4"
white starboard. Pre-attached to a 6"
SeaSucker for incredible holding power.
You might as well go all the way and get
these great accessories for your Party
Barge:
Yoebi Stemware Holder
DrinX Cup Holder Insert
Small Dry Box
If you don't love to party, this might not be
the right product for you. May we suggest
our 4-Cup Holder instead? If you DO love
to party, read on ...
The Party Barge attaches to a horizontal
surface, like a table top or console top, and
keeps your bottles and cups from finding
their way to the deck. The five deep 3 1/2"
cup holders handle your cans and bottles
in coozies, cups and wine glasses.
All the cup holder slots are cut to
accommodate our Small Dry Box, which, as
it turns out, is a great way to keep olives,
maraschino cherries and other drink
necessities fresh. A raised ring on the top
corrals your limes.
The center bottle hole is approx. 4 3/8"
diameter and fits a 2-liter mixer bottle
perfectly. The two outer bottle holes are
approx. 5 1/8" diameter and fit 1.75 liter
booze bottles, plus they have adjustable
arms with locking knobs to clamp down on
smaller bottles if for some strange reason
you don't buy the bigger bottles of rum,
vodka, gin, etc.
Approx. 22 1/2" x 16', machined from 3/4"
white starboard. Pre-attached to a 6"
SeaSucker for incredible holding power.
You might as well go all the way and get
these great accessories for your Party
Barge:
Yoebi Stemware Holder
DrinX Cup Holder Insert
Small Dry Box
| List Price $189.99 |
| List Price $79.99 |
SeaSucker/RAM Cup Holder
We know - it's a super expensive cup
holder, but people keep asking us for a
single cup holder on a SeaSucker. The
good news is, this one's on a RAM
Mount, which means you get incredible
maneuverability to go along with the
strength and versatility of the
SeaSucker. The cup holder swings on
2 axes, so you can mount this baby on
a horizontal or a vertical surface and
still not spill you drink. Plus, it's got a
slot for mug handles - what more could
you ask for?
We know - it's a super expensive cup
holder, but people keep asking us for a
single cup holder on a SeaSucker. The
good news is, this one's on a RAM
Mount, which means you get incredible
maneuverability to go along with the
strength and versatility of the
SeaSucker. The cup holder swings on
2 axes, so you can mount this baby on
a horizontal or a vertical surface and
still not spill you drink. Plus, it's got a
slot for mug handles - what more could
you ask for?