847-373-1841
Models #250 & #300 - Quality, Design and Ease of use make these
davits the choice of discriminating boaters. Rated for 350 lbs. (158 kg.)
per pair, these stainless steel davits carry your load safely. When not in
use, they remove in seconds. Engineered for the marine environment,
the 1" (25mm) tubular stainless is mirror polished to a lasting finish.
Two models give you a choice of a 7:1 or 9:1 lifting ratio.
St. Croix Removable Davits
New! Model #500 Removable Davits - Designed for heavier lifting, these removable davits are rated for 480
lbs. (218 kg) per pair. 1.5" (38mm) diameter heavy wall tubing combined with a 9:1 lifting ratio make these
davits the strongest St Croix Removable Davit system available, yet maintain the streamlined style and ease of
use of the original St. Croix Davits. Optional mounting hardware includes #511 Removable 6" (15.24 cm.) Riser
and #505 Electric Motor.
Davit Arms Remove In Seconds!
Launch your tender and pull the
locking pin to slide the davit arm out of
the shoe. That's all you do to clear
your stern for swimming, fishing or any
other use!
For Sail and Power boats! Removable Davits install on sail boats as well as power boats. Proper installation provides years of service.
|
#214 Compression Plates and
#242 Ratchet Straps securing
tender in davits.
Specifications for St. Croix Removable Davits
* Models #250 & #300 rated to lift 350lbs.(158 kg.). This is the recommended weight of the load that will provide a
comfortable line pull when taking the lifting ratio into consideration.
|
|
|
Mtg. Shoe Dims. (Length x Width)
|
|
Recommended Wt. for Lifting Ratio *
|
|
|
|
|
|
|
|
7 1/8" x 4 5/8" (18.1 x 11.7 cm.)
|
|
|
|
|
|
|
|
|
7 1/8" x 4 5/8" (18.1 x 11.7 cm.)
|
|
|
|
|
|
|
|
|
11" x 5" (27.9 x 12.7 cm.)
|
|
Rated for 480 lbs. (218kg.)
|
|
|
|
|
|
Optional Mounting Hardware for #250 & #300 Model Removable Davits
The design of some boats may require the use of additional mounting hardware. All optional mounting hardware is fabricated from
stainless steel.
|
|
|
|
|
|
|
An inverted tripod support for sportfish boats when the coaming surface is unsupported. Requires dimensions from customer.
|
|
|
|
|
|
A custom fitted vertical mount used to support the stern of the boat. Depending on the stern style on your boat, will be mounted either on the inside or outside of the transom. Call the factory for specifications needed for this mount.
|
|
|
|
|
|
Adds 6" of additional height under the mounting shoe of the davits.
|
|
|
|
|
|
Adds additional height when needed. Use of 12" Risers increases the leverage of the davits on the boat and limits the davit capacity to 200 lbs.(90 kg.)
|
|
|
|
|
Compression Plates *See picture above
|
|
Trapezoidal shape plates that provide a larger footprint for the davit to push on. Use on teak covering boards or when the mounting surface is cored. Required on all Searay boats with an integrated swim platform.
|
|
|
|
|
Lifting Accessories for a Complete Davit System
|
|
|
|
|
|
|
2 "D" ring patches that are glued to the inside of the Hypalon inflatable. Used to attach the bow lifting sling. Glue not included.
|
|
|
|
|
|
2 "D" ring patches that are glued to the inside of the PVC inflatable. Used to attach the bow lifting sling. Glue not included.
|
|
|
|
|
|
2 eyebolts that are mounted in the transom of the inflatable. Used as a place to attach the stern lifting sling.
|
|
|
|
|
|
Stainless steel tubular lifting bracket eliminates the use of stern lifting slings. Bolts to the inside transom of the dinghy.
|
|
|
|
|
|
2 thru-hull eye bolts used for bow lifting points in RIBs only.
|
|
|
|
|
|
A pair of 5/16" double braid lines - 50' long. Length needed depends on your boat.
|
|
|
|
|
|
A pair of 5/16" double braid lines - 75' long. Length needed depends on your boat.
|
|
|
|
|
|
A pair of 5/16" double braid lines - 100' long. Length needed depends on your boat.
|
|
|
|
|
|
Stainless steel cable slings in 13" length, used to lift the bow and stern of the tender.
|
|
|
|
|
|
Stainless steel cable slings in 15" length, used to lift the bow and stern of the tender.
|
|
|
|
|
|
Stainless steel cable slings in 17" length, used to lift the bow and stern of the tender.
|
|
|
|
|
|
Stainless steel cable slings in 19" length, used to lift the bow and stern of the tender.
|
|
|
|
|
|
Stainless steel cable slings in 21" length, used to lift the bow and stern of the tender.
|
|
|
|
|
|
Winch has a 6:1 ratio and a removable handle that floats. Can be added to davit arms to increase the lifting ratio.
|
|
|
|
|
Ratchet Tie Down Restraints *See picture above
|
|
Black 1" (25mm) wide nylon web with stainless steel ratchets and hooks. Used to secure the load in the davits. Straps are 5' each 5' (1.53m) long. Highly recommended for use with all davit systems.
|
|
|
|
|